PAN9020/10 Module Wi-Fi Radio 802.11 b/g/n

PAN9020/10 is a series of 2.4GHz ISM band wireless radio modules for implementing WLAN functionality into various electronic devices. The cost-effective, low-power operation, system-on-chip (SoC) solutions enable wireless network applications to be built with low total bill-of-material costs.

The radio modules combine an excellent 802.11 wireless radio, baseband processor, medium access controller, encryption unit, boot ROM with patching capability, internal SRAM, in-system programmable flash memory and many other powerful supporting features and peripherals. The low-power operation is supporting deep sleep and standby modes by using the on-board power management unit.

Layout design efforts, calibration- and test efforts in production are reduced compared to discrete solutions resulting in precious advantage in terms of time-to-market.

Panasonic offers a software package supporting various Fedora Core Kernel versions. The Hardware Interface Driver controls the hardware interface on the HOST side. Furthermore, the software package from Marvell® consists of various applications, demonstrations and utilities.

Features

  • Surface Mount Type 22.75 mm x 13.5 mm x 2.4 mm
  • Wireless Local Area Network (WiFi) Technology
  • Supports IEEE 802.11
    • IEEE 802.11b/g payload data rates
    • IEEE 802.11n high throughput data rates
    • IEEE 802.11i security standards AES-CCMP, WEP, TKIP, AES-CMAC and WAPI
    • IEEE 802.11e Quality of Service (QoS)
  • Coexistence Interface for external co-located 2.4GHz radios (e.g. Bluetooth)
  • Tx power up to +18 dBm (IEEE 802.11b CCK) and 14dBm (IEEE 802.11g ODFM)
  • High Rx sensitivity -98dBm (IEEE 802.11b DSSS 1Mbps)
  • Marvell® 88W8782 WLAN System-on-Chip (SoC) solution inside
  • High performance low power CPU core
  • Two powerful independent DMA channels
  • Power Management Unit Sleep Clock (for Power Save Mode)
  • Internal crystal oscillator (40MHz)
  • USB 2.0 or SDIO interface
  • Integrated shielding to resist EMI

Part-Number

Description

ENW49801A1JF

PAN9020-USB

USB Interface, chip antenna

ENW49802A1JF

PAN9020-SDIO

SDIO Interface, chip antenna

ENW49801C1JF

PAN9010-USB

USB Interface, 50 Ohm pad

ENW49802C1JF

PAN9010-SDIO

SDIO Interface, 50 Ohm pad

PAN9020S - 2x SDIO-Adapter (Order-No. ENW49802AYJF)
PAN9020S Evaluation Kit with two PAN9020S SDIO adapters packaged in a small case. The adapter has a SDIO interface and allows hardware access to the module pins. It is designed to be used with a Linux / Android system having installed the SW packages and Kernel drivers available at the Marvell XtraNet.

PAN9020S - Single SDIO-Adapter (Order-No. ENW49802AZJF)
PAN9020S ETU with one PAN9020S SDIO adapter. The adapter has a SDIO interface and allows hardware access to the module pins. It is designed to be used with a Linux / Android system having installed the SW packages and Kernel drivers available at the Marvell XtraNet.

PAN9020S - 2x USB-Adapter (Order-No. ENW49801AYJF)
PAN9020U Evaluation Kit with two PAN9020U USB adapters packaged in a small case. The adapter has a USB interface and allows hardware access to the module pins. It is designed to be used with a Linux / Android system having installed the SW packages and Kernel drivers available at the Marvell XtraNet.

PAN9020S - 1x USB-Adapter (Order-No. ENW49801AZJF)
PAN9020U ETU with one PAN9020U USB adapter. The adapter has a USB interface and allows hardware access to the module pins. It is designed to be used with a Linux / Android system having installed the SW packages and Kernel drivers available at the Marvell XtraNet.