PAN1720/21 - Bluetooth Low Energy Module

This Bluetooth low energy single-mode module has been specially developed for applications which communicate with dual or single mode Bluetooth low energy devices like mobile phones, PDA´s, Laptops etc. So it is very easy to expand your personal area network with this module, using existing gateways. The included Bluetooth low energy stack is currently supporting the proximity and battery profile. The user specific application can be written on top of the Bluetooth Stack. The communication between stack and application is handled via vendor specific HCI-commands. The PAN1720(21)-Module is manufactured in a very small 15.6 x 8.7 x 1.9 mm³ SMD package with shielded case and will be qualified according to the Bluetooth 4.0 standard.

General

  • Complete Bluetooth low energy solution (Bluetooth 4.0)
  • Supported Profiles: Proximity and Battery profiles
  • Low power 8051 C included
  • Up to 256k Flash and 8k RAM
  • Data rates up to 1 Mbps
  • IR Generation Circuitry
  • AES Security Coprocessor
  • Temperature Range from -40°C to + 85°C
  • Supply Voltage Range from 2.0V to 3.6V, typ. 3.0V
  • Dimension only 15.6 x 8.7 x 1.9 mm³
  • Dimension and Footprint compatible to PAN1320/21

Interfaces

  • Two powerful USARTs with support for several serial protocols
  • Full speed USB 2.0 interface
  • 19 general-purpose l/O pins (17 x 4mA, 2x20 mA)
  • 12-Bit ADC with eight channels and cofigurable resolution

Applications

  • 2.4 GHz Bluetooth low energy systems
  • Proprietary 2.4 GHz systems
  • Human Interface Devices
  • Sports and leisure equipment
  • Mobile phone accessories
  • Remote control for computers, MP3 players
  • Consumer Electronics
  • USB dongles
  • Health Care and Medical

Part number

Description

ENW89820A1KF (2)

PAN1720

CLASS 2 Bluetooth single mode Module according BT-4.0.

Bluetooth® smart device

ENW89820A3KF (2)

PAN1720

Same as above including BlueRadios BR-SPP FW version.

Bluetooth® smart device

ENW89835A1KF (2)

PAN1721

CLASS 2 Bluetooth single mode Module according BT-4.0.

Bluetooth® smart device

ENW89835A3KF (2)

PAN1721

Same as above including BlueRadios BR-SPP FW version.

Bluetooth® smart device

ENW89835C1KF

PAN1711

CLASS 2 Bluetooth single mode Module according BT-4.0.

Bluetooth® smart device without antenna

ENW89835C3KF

PAN1711

Same as above without antenna including BlueRadios BR-SPP FW version.

Bluetooth® smart device without antenna

Notes:

(1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is 1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels.

(2) Samples are available on customer demand

PAN1720 BR - Evaluation Kit (Order-No. ENW89820AY2F)
PAN1720 BlueRadios USB-Evaluation Stick. The stick has a USB to UART converter and allows hardware access to the module pins. For evaluation and development on BlueRadios AT command set. Details see Application Note.

 

PAN1720 BR - Single USB-Stick (Order-No. ENW89820AZ2F)
One single PAN1720 BlueRadios USB-Evaluation Stick packed in a ESD bag. The stick has a USB to UART converter and allows hardware access to the module pins. For evaluation and development on BlueRadios AT command set. Details see Application Note.

 

PAN1720 TI - Evaluation Kit (Order-No. ENW89820AY1F)
Two PAN1720 TI USB-Evaluation Stick. The stick has a USB to UART converter and allows hardware access to the module pins. For development with Texas Instruments RF Studio. Details see ApplicationNote.

 

PAN1720 TI - Single USB-Stick (Order-No. ENW89820AZ1F)
One single PAN1720 TI USB-Evaluation Stick packed in a ESD bag. The stick has a USB to UART converter and allows hardware access to the module pins. For development with Texas Instruments RF Studio. Details see ApplicationNote.

 

PAN1721 TI - Evaluation Kit (Order-No. ENW89835AY1F)
Two PAN1721ETU TI USB Evaluation Sticks packed in a small case. The Stick has a debug interface for the CC-Debugger and can be programmed with custom firmware. For development with Texas Instruments RF Studio. Details see ApplicationNote.

 

PAN1721 TI - Single USB-Stick (Order-No. ENW89835AZ1F)
One single PAN1721ETU TI USB Evaluation Stick packed in a ESD bag. The Stick has a debug interface for the CC-Debugger and can be programmed with custom firmware. For development with Texas Instruments RF Studio. Details see ApplicationNote.